Error codes › Refrigerator › LG
LG Refrigerator Er FF Error Code
Freezer evaporator fan fault
What's going on
Er FF on an LG refrigerator means the control board has detected a problem with the freezer evaporator fan. The fan may have failed, or ice may be blocking it from spinning. Your food can start to warm, so move perishables to a cooler or another freezer if temperatures are rising, and plan to have the fan or defrost issue looked at.
The freezer has a small fan behind the back wall that blows air across the cold evaporator coils. That air cools the freezer and also flows into the fresh food section. The control board watches this fan, and if it is not spinning at the expected speed, it shows Er FF.
Without that fan, cold air stops moving. The freezer and fridge can slowly warm up even though the compressor is still running. That is why this code matters for keeping food safe.
Error codes can vary between LG model generations. Check your model number on the label inside the fridge and confirm the code's meaning in your owner's manual.
Likely causes
- evaporator fan motor — The motor can wear out, seize, or stop responding to the control board. When it no longer spins at the right speed, the board flags Er FF.
- defrost icing — If the defrost system is not melting frost off the coils, ice can build up around the fan blade and stop it from turning. The fan motor may be fine, but it is physically blocked.
The same code can mean different things on different model generations. Check the model number on your refrigerator's rating plate before ordering parts.
Can you fix it yourself?
Hard to do yourself. Most people end up calling a technician.
Safe things to check first
- Open the freezer and listen near the back wall. A normal fan makes a steady whirring sound. Silence, grinding, or clicking can point to a fan problem or ice hitting the blade.
- Look at the freezer's back panel and vents for heavy frost or ice buildup. Also make sure food packages are not pressed against the vents and blocking airflow.
- Make sure the freezer door closes fully and the seal is not torn or folded. A door left ajar lets in moist air that adds to ice buildup.
- Power-cycle the refrigerator by unplugging it or switching off its breaker for a few minutes, then restore power and see if the code returns. Always unplug the fridge or turn off its breaker before touching anything inside it.
When to call a technician
Call a qualified appliance technician if Er FF comes back after a power cycle, or if you hear no fan or see heavy ice behind the freezer panel. Replacing the fan motor or fixing a defrost problem means removing interior panels, which most owners leave to a technician.
What the repair usually costs
This is not a quote. Prices vary by region and by model.
Repair or replace?
Repair usually makes sense. Even the high end of this repair stays under $720, about half the price of a typical new refrigerator.
A typical new refrigerator costs about $600–$2,300.
Check your refrigerator — free, 2 minutes
Common questions
- What does Er FF mean on a LG refrigerator?
- Er FF means: Freezer evaporator fan fault. The most likely parts involved are evaporator fan motor, defrost icing.
- How much does it cost to fix Er FF?
- A typical evaporator fan motor replacement costs about $225–$400 nationally, parts and labor included. This is a reference range, not a quote — local prices vary.
- Should I repair or replace my refrigerator?
- Repair usually makes sense. Even the high end of this repair stays under $720, about half the price of a typical new refrigerator.
- Can I fix Er FF myself?
- Hard to do yourself. Most people end up calling a technician.
- Can I keep using my LG fridge with an Er FF code?
- It may keep running, but cooling can drop because cold air is not moving. Check food temperatures often and move perishables if the freezer or fridge starts to warm. Get the problem looked at soon.
- Why does Er FF keep coming back after I reset the fridge?
- A reset clears the code, but it does not fix a worn fan motor or ice buildup. If ice is the cause, it will form again until the defrost problem is found and fixed.