Error codes › Oven › Frigidaire
Frigidaire Oven F10 Error Code
Runaway temperature
Also shown on Electrolux ovens.
What's going on
F10 on a Frigidaire or Electrolux oven means the control has detected a runaway temperature, so the oven got hotter than it should or the control lost track of the real temperature. This can be a fire risk. Stop using the oven, turn it off, switch off its circuit breaker, and contact a qualified appliance technician.
The oven uses a temperature sensor, called an RTD sensor, to tell the control board how hot the oven cavity is. The control board, often called the EOC (electronic oven control), uses that reading to turn the heating elements or burner on and off.
If the control sees the temperature climb far above the set point, or the sensor reading stops making sense, it shows F10. This is a safety alert. An oven that keeps heating without control can overheat, damage itself, and start a fire. Because error codes can differ between model generations, confirm the meaning with your model number in your owner's manual.
Likely causes
- RTD sensor — If the sensor fails or its reading drifts, the control board may get a wrong temperature. The board can then overheat the oven or flag the reading as a runaway condition.
- EOC control board — A failed control board can keep the heat turned on when it should shut off. This lets the temperature run away even when the sensor is reading correctly.
The same code can mean different things on different model generations. Check the model number on your oven's rating plate before ordering parts.
Can you fix it yourself?
Not a DIY repair. This one needs a technician with the right tools and parts.
When to call a technician
Call a qualified appliance technician right away, and leave the oven off with its breaker switched off until it has been inspected. This repair is not a do-it-yourself job because the fault involves overheating and a fire risk.
What the repair usually costs
This is not a quote. Prices vary by region and by model.
Repair or replace?
It depends on age. This repair can cross $480, about half the price of a typical new oven. If yours is near the end of a typical 10–15 year lifespan, compare replacement prices before booking a repair.
A typical new oven costs about $600–$1,300.
Common questions
- What does F10 mean on a Frigidaire / Electrolux oven?
- F10 means: Runaway temperature. The most likely parts involved are RTD sensor, EOC control board.
- Is it safe to keep using the oven?
- This code can mean the appliance is overheating. Turn it off at the circuit breaker (or unplug it if you can do so safely) and call a qualified technician. Do not try to diagnose or repair this yourself.
- How much does it cost to fix F10?
- A typical control board replacement costs about $200–$600 nationally, parts and labor included. This is a reference range, not a quote — local prices vary.
- Should I repair or replace my oven?
- It depends on age. This repair can cross $480, about half the price of a typical new oven. If yours is near the end of a typical 10–15 year lifespan, compare replacement prices before booking a repair.
- Can I fix F10 myself?
- Not a DIY repair. This one needs a technician with the right tools and parts.
- Is it safe to keep using my oven with an F10 code?
- No. F10 means the oven may overheat without control, which can be a fire risk. Turn it off, switch off its breaker, and do not use it until a qualified appliance technician has checked it.
- What should I do if the oven is still hot or I smell burning?
- Keep the oven door closed and switch off the oven's circuit breaker if you can do so safely. If you see smoke or flames, get everyone out and call 911.